Your shopping cart is empty!
Quantity / Size
SFUR Series
Dimension: mmLoad: kgf
Ball screw nut SFUR xxxx series and ball screw SCR xxxx series are one of the reliable drive elements in movements fixed with linear bearing. The ball shaft provides the completion of the movement together with elements such as servo motor, stepper motor, gearmotor, with 5mm pitch and 10mm pitch. Since the screws are manufactured by rolling method, they have a surface hardness of 55 HRC. Thanks to the seals on both sides of the steel nuts, dust is kept out. With 4 rows of marbles, it has high axial force resistance power. Flanged series are captured from the flange and fixed to the moving part with the help of "nut body". It does not lose its sensitivity even at high speeds and has a long service life.
Screw Shaft Nut Installation video: Screw Shaft Nut Installation
Installing a ball nut on a machined ball screw: Nut installation
Video of picking up a scattered ball nut: Ball Screw Nut Picking
İlgili Ürünler
BFSeriesSize: mmBF series bearings are for mounting opposite the motor side of the ball screw. It provides bearing of the end of the ball screw. The 6000 series single row ball bearing inside is resis...
HRJ-C SeriesOne of the most important points in the use of ball screws is that there is no gap in the connection of the motor or reducer and the ball screw. The gap here will disrupt the intended sens...
BKSeriesDimension: mmBK series ball screw bearings are mounted on the motor side of the ball screws to transfer the axial loads to the body. Thanks to the 6000 series of 2 back-to-back bearings in the...
SSG SeriesIn the use of ball screws, it is important that the nut part is fixed to the body. Here, the part that fixes the nut to the body should not have an axis shift or the diameter of the round ho...
SCR SeriesDimension: mmLoad: kgfBall screw nut SFUR xxxx series and ball screw SCR xxxx series are one of the reliable drive elements in movements fixed with linear bearing. The ball shaft provides th...
Reviews (0)
Write a review