Servo Motor with Brake 7.5 kW - 180LZ-M48015 - LZ3a-75LM

Servo Motor with Brake 7.5 kW - 180LZ-M48015 - LZ3a-75LM

Availability: In Stock

Product Code: Frenli-180LZ-M48015 - LZ3a-75LM

$1,900.00

Quantity / Size

Add to Wish List

Compare this Product

Description

Servo Motor Driver Alarm Connection Diagram Servo Motor Driver Basic Connection Diagram Servo Motor Mounting Dimensions

Model 180LZ-M48015 - LZ3a-75LM servo motor with 7.5 kW and 220 volt voltage current has a torque value of 3.18 and reaches 2500 revolutions per minute. You can buy 7.5 kW servo motor with 130x130 flange power by reviewing the price.

External Resistance Values :220watt ,50ohm

Servo Motor Drive Installation Settings

180LZ-M48015 | LZ3a-75LM7.5 kW Servo Motor Specifications

Servo motor working environment: Operation: 0℃～40℃ Storage: -40℃～50℃
Poles 4-pole servo motor
Incremental encoder line: 2500 / 5000PPR
Absolute encoder 17
Humidity maximum: Operation (without condensation) 40% ~ 80% Storage: (with condensation without moisture) below 93
Insulation Class: B
Servo Motor Protection Class: IP54
Servo Motor Isolation Voltage: AC1500V, 2 minutes
Servo Motor Insulation Resistance: DC500V, 10MΩ or more
Structure: Self-cooled servo motor
Vibration 2.5G or less
Altitude 1000m or less
Operation: Servo motor runs continuously.
Servo Motor Assembly: Flange Mounting

180LZ-M48015 | LZ3a-75LMServo Motor Technical Specifications

MODEL		LZ3-20L	LZ3-30L	LZ3-40L	LZ3-50L	LZ3-75L	LZ3-25H	LZ3-50H	LZ3-75H
Input Power Supply	Main Power supply	Single - Phase / Three - Phase 220VAC - 15%+10% 50/60Hz					Three Phase 380VAC -15%+10% 50/60Hz
Environment	Temperature	Operation: 0°C ~ 40°C ~ 50°C
	Nem	Operation: 40% ~ 80% (non-condensing) storage: below 93% (non-condensing humidity)
	Atmospheric Pressure	80 kPa ~ 106 kPa
Protection Class		IP 20
Control Mode		Position, Velocity, Torque, Position/Velocity, Velocity/Torque, Position/Torque
Digital Input		8 Programmable input terminals (photoelectric isolation)
Digital Output		6 Programmable input terminal (photoelectric isolation)
Encoder Signal Output	Signal Type	A,B,Z differential output Z signal open adder
Location	Input Frequency	Differential inputs <500kHz (kpps): Single-ended input <200kHz (kpps)
	Command Code	Pulse + symbols; Forward/Reverse pulse; orthogonal pulse
	Electronic Gear Ratio	1~32767/1 ~ 32767
Speed	Simulation Command Input	10VDC, input impedance 10Ω
	Command Acceleration and Deceleration	Parameter setting P-065/P-066
	Command Source	Analog quantity, internal torque command
Torque	Simulation Command Input	-10V ~ +10V, input impedance 10Ω
	Torque Limitation	Parameter setting P-065/P-066
	Command Source	Analog quantity, internal torque command
Monitoring Function		Rotation speed current position position deviation motor torque motor current command pulse frequency etc.
Protection functions		Over Speed, over voltage, over current, over current, over load, brake abnormality, encoder abnormality, position overshoot, instruction overclocking, etc.
Features	Speed Frequency Response	800Hz"}">>800Hz
	Speed Fluctuation Rate	<+0.03%(load 0 ~ 100%); <+0.02%(power -15% ~ +10%)