Servo Motor with Brake 0.75 kW - SG-15A

Servo Motor Types with Brake – 80SY-M02430 & SG-15A

80SY-M02430 & SG-15A brake servo motor types vary according to their specifications. 60SY-M01330 & SG15A servo motor with brake has a power rating of 0.75 kw and is also an ideal servo motor with brake for use in factory automation, laboratory equipment, automobile testers and other precision applications. In this way, it keeps the controlled load of the application at a constant speed, allowing it to run precisely and dynamically. Preferred by many manufacturers, the 80SY-M02430 & SG-15A servo motor with brake offers rational solutions. With a 2.4 Nm holding torque, it allows your servo motor with brake to operate with professional precision and dynamic speed. In addition, the flange value of 80×80 mm supports the efficient and safe operation of your machine. By ordering the 80SY-M02430 & SG-15A servo motor with brake from Sahin Rulman, you can ensure that your machine operates professionally.

80SY-M02430 & SG-15A Servo Motor Prices with Brake

Brake servo motor prices generally vary according to their features. 80SY-M02430 & SG-15A brake servo motor price with 3000 rpm power is very advantageous. You can have the 80SY-M02430 & SG-15A brake servo motor type, which increases its performance and functionality while using your machine, in a short time by ordering immediately.

0.75 Kw Servo Motor Installation Settings

0.75 Kw Servo Motor Specifications

• Servo motor working environment: 0℃~55
• Poles: 4-pole servo motor
• Incremental encoder line: 2500 / 5000PPR
• Absolute encoder: 17
• Humidity maximum: 90%
• Insulation Class: B
• Servo Motor Protection Class: IP54
• Servo Motor Isolation Voltage: AC1500V, 1 minute
• Servo Motor Insulation Resistance: DC500V, 10MΩ or more
• Structure: Self-cooled servo motor
• Vibration: 2.5G or less
• Altitude: 1000m or less
• Operation: The servo motor runs continuously.
• Servo Motor Assembly: Flange Mounting

SG15A Servo Motor Internal Speed Control Mode

PA-4=> 1 (hız kontrol modu)

PA-22=> 0

PA-24=> desired speed..

Click for Servo Motor Speed Steps.

Internal Servo_On parameter : PA53 => 1 (instead of enabling with 24 Volts…)

Servo Motor O-10 VOLT Drive Parameters

PA4 => 1

PA43=> 3000 (maximum engine speed)

PIN NUMBER 12 => + 10Volt

PIN NUMBER 13 => 0 Volt

with relay for start stop

PIN 8 => +24

PIN 20 => 0 volt

80SY-M02430 Servo Motor Technical Specifications

Servo Motor Drive Standard Connection Settings