, ,

Single Absolute Servo Motor 0.75 kW - 80LZ750 - LZ100

SKU: Single Absolute - 80LZ750 - LZ100
POWER 0,75 kW
TORQUE 2.39 Nm
RPM 4500 rpm/min
FLANGE 80×80 mm

$250,00

Paket Halinde Daha Ucuza ⭐️

  • Single Absolute Servo Motor 0.75 kW - 80LZ750 - LZ100
  • Planet Redüktör 80PLF10K
Total Price: $361,00 $380,00
Save 5% when bought together

Servo Motor Drive Alarm List Servo Motor Drive Position Control Connection Diagram Servo Motor Mounting Dimensions

80LZ750 – LZ100 Single Absolute Servo Motor Types

80LZ750 – LZ100 Single Absolute servo motor types vary according to their features. 80LZ750 – LZ100 Single Absolute servo motor has a power value of 0.75W and is also an ideal type of single absolute servo motor for use in small medical devices, industrial automation equipment and robotic devices. In this way, the controlled load of the application can be kept at a constant position or speed. Preferred by many manufacturers, the 80LZ400 – LZ100 Single Absolut servo motor type offers rational solutions. With its holding torque of 1.27 Nm, it ensures that your servo motor remains professionally stable. In addition, the 60x 60 mm flange value supports the efficient and safe operation of your machine. You can ensure that your machine operates professionally by ordering the 80LZ750 – LZ100 Single Absolute servo motor type from Şahin Rulman immediately.




80LZ750 – LZ100 Single Absolute Servo Motor Prices

Single Absolute servo motor prices generally vary depending on their features. The price of 80LZ750 – LZ100 Single Absolute servo motor driver with 220 volt power is $225.00. You can immediately order the 80LZ750 – LZ100 Single Absolute servo motor type, which increases the performance and functionality of your machine.




80LZ750 New Generation Servo Motor Technical Video

80LZ750 New Generation Servo Motor Jog Settings

80LZ750 New Generation Servo Motor Working Example

80LZ750 Kw Servo Motor Features

  • Servo motor working environment: Operation: 0℃~40℃ Storage: -40℃~50℃
  • Poles: 4-pole servo motor
  • Absolute Single Circle: 17Bit
  • Humidity maximum: 90%
  • Insulation Class: B
  • Servo Motor Protection Class: IP54
  • Servo Motor Isolation Voltage: AC1500V, 1 minute
  • Servo Motor Insulation Resistance: DC500V, 10MΩ or more
  • Structure: Self-cooled servo motor
  • Vibration: 2.5G or less
  • Altitude: 1000m or less
  • Operation: The servo motor runs continuously.
  • Servo Motor Assembly: Flange Mounting

New Generation Absolute 80LZ750 Servo Motor Technical Specifications

Model P100S-40 P100S-75
Power 0.05kW~0.4kW 0.75kW~1kW
Main Circuit 1 Phase AC220V-15%~10%~50%/60Hz
Control Mode 0:Location. 1:Speed. 2: Torque. 3:Position and speed. 4:Position and torque. 5:Speed and torque
Protection Function Over speed, Over voltage, Under voltage, Over load, Abnormal main power, Abnormal encoder, Out of position error etc.
Monitoring Function Speed, Current position, Command pulse accumulation, Position deviation, Motor torque, Motor current, Operating status, etc.
Control Input 1:Servo on 2:Alarm clearing 3:CCWdrive inhibition 4:CCWdriveinhibition 5:Step counter clearing 6:Command pulse inhibition7:CCW torque limit 8:CW torque limit
Control Output Servo ready/Servo alarm/Positioning completion/Mechanical braking
Regeneration Braking Built-in/ Built-out
Load Less than 3 times the engine torque
View 5 LED digital display and 4 keys
Contact RS485
Position Control
Mod
Introduction
Mod
0:impulse+direction
1:CCW/CW pulse
2:A/B phase orthogonal pulse
3:Internal position control
Electronic Gear Ratio 1-32767/1-32767

Signal Cable Pins and Colors;

Pin No Color Function
33Blue BlackALM+
22Green BlackD-
21Yellow BlackP-
34Black0V
34BlueALM-
6GreenD+
5YellowP+
16Red24V

80LZ750 Series Internal Servo-ON Parameter:

PA53 => 1

Motor selection with Servo Motor Drive Parameter Settings

Alarm
D02+Pin33
D02-Pin34
If Alarm Input is Positive
Pin33(+)24V
Pin34ALM İnput
If Alarm Input is Negative
Pin33ALM İnput
Pin340 Volt

Servo Motor Alarm List

No Error Name Definition No Error Name Definition
Normal 29 Alarm for torque overload Motor load exceeds user-set values and range
1 Excessive Speed Motor speed is above the set values. 38 Encoder EEPROM communication read or write error Encoder cable not connected Or encoder interface circuit fault
2 Main circuit overvoltage Main circuit voltage too high 39 Data CRC check error The motor encoder wrote no data and all 0.
3 Main circuit low voltage Main circuit voltage too low 40 Model not supported The drive does not support this motor model
4 Position overshoot The value of the position deviation counter is above the set value. 41 You need to change the engine model Current motor inconsistent with selected drive model
5 Overheating of the drive High temperature of the driver 42 AC input low voltage AC input low voltage
6 Speed booster saturation error Speed adjustment for long-lasting saturation 47 Overvoltage in main circuit Over-voltage when opening the main circuit
7 Driver blocking error Speed adjustment at saturation for a long time 50 Encoder communication error Driver and encoder not connected
8 Position deviation accumulation was out of range The absolute value of the position deviation accumulation is above 2 30 51 Encoder communication abnormal After the encoder establishes communication, interruption and disconnection appear.
11 IPM module error IPM smart module error 52 Encoder battery voltage insufficient alarm Encoder battery voltage insufficient alarm, but the information is not lost and needs to be replaced as soon as possible
13 Drive overload Servo drive and motor overload (instantaneous overheating) 53 Encoder battery voltage error alarm Encoder battery voltage error alarm and storage information, an error occurred requiring the encoder to be reset.
14 Brake problem Brake circuit Fault 54 Encoder error alarm The encoder alarm without battery, but you need to reset the encoder again.
18 Relay switch fault The actual state of the relay is different from the control state. 55 CRC check fails 3 times in a row Encoder communication received data CRC verification 3 consecutive errors.
19 Error occurred when there was a delay to open the brake Impact inputs before opening 56 MODBUS frame too long MODBUS frame data received is too long
20 EEPROM error EEPROM error 57 Abnormal MODBUS communication format Incorrect setting of communication parameters or incorrect address or value
21 FPGA module error FPGA module error 58 Single turn position error Single rotation position offset stored by the drive exceeds encoder resolution
23 Current collection circuit malfunction Current collection circuit malfunction 59 Encoder reports CF error The encoder constantly reports CF domain error and you need to reset the encoder

Servo Motor Drive Position Control Wiring Diagram

Servo Motor Mounting Dimensions



Technical Specification

SKU: Single Absolute - 80LZ750 - LZ100 Categories: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Single Absolute Servo Motor 0.75 kW – 80LZ750 – LZ100”

There are no reviews yet.

Para birimini seçin