$13,00
LMEK UU Series Linear Bearings
Measurement: mm
The LMEK xx UU series is distinguished from the LME series by its flanged head section. The bearing held by the flange section can be easily secured to the body or moving part. In applications, the flange section is seated in a flanged socket and used as a support for axis stabilization.
You must be logged in to post a review.
| Height Including Rail | 30 mm |
| Hole Center Width x Length | 32X50 mm |
| Overall length | 92.20 mm |
| All width | 44 mm |
| Static Load Capacity | 48.84 kN |
| Dynamic Load Capacity | 21.18 kN |
| Center-to-Center Distance Between Holes | 60 mm |
| Rail Base Width | 20 mm |
| Height Including Rail | 45 mm |
| Hole Center WxL | 40×60 mm |
| Overall length | 120.40 mm |
| Overall Width | 60 mm |
| Static Carrying Capacity | 110.13 KN |
| Dynamic Carrying Capacity | 47.27 KN |
| Rail Hole Center Distance | 80 mm |
| Rail Base Width | 28 mm |
| Height Including Rail | 36 mm |
| Hole Center WidthxLength | 57×45 mm |
| Total length | 104.60 mm |
| All | 70 mm |
| Static Load Capacity | 76 kN |
| Dynamic Load Capacity | 32.75 kN |
| Center-to-Center Distance | 60 mm |
| Rail Base Width | 23 mm |
| LINEAR RAIL CAR TECHNICAL SPECIFICATIONS | |
| Height Including Rail | 28 mm |
| Hole Center Width x Length | 26×26 mm |
| Overall Length | 61.40 mm |
| All | 34 mm |
| Static Load Capacity | 25.31 kN |
| Dynamic Load Capacity | 11.38 kN |
| Center-to-Center Distance | 60 mm |
| Rail Base Width | 15 mm |
Linear Slide Linear Rail Carriage SHN 30 AL 
Stepper Motor Mount 42mm flange (NEMA 17) L type 
There are no reviews yet.